The Easyboot Flip Flop is a hybrid between the Easyboot Glue-On and the EasyShoe. It boasts a simple gluing procedure combined with an open back design allowing it to stay on the hoof for the duration of the trim cycle. The Flip Flop is an easy “set it and forget it” solution well-suited for both performance and therapeutic applications.
The Easyboot Flip Flop is glued only to the dorsal wall of the hoof. Due to the lack of movement in this part of the hoof, minimal stress is placed on the adhesive bond. This design ensures a reliable bond, week after week. The open back allows for airflow to the frog and sole and will not hamper the natural mechanics of the back portion of the hoof. The long-term effects of increased hoof flexion can promote a highly developed vascular system along with an overall healthier hoof.
Easyboot Flip Flop Size Chart | ||
Size |
Width in mm |
Length in mm |
0 |
104-107mm |
Trim to Size |
0.5 |
108-111mm |
Trim to Size |
1 |
112-115mm |
Trim to Size |
1.5 |
116-119mm |
Trim to Size |
2 |
120-123mm |
Trim to Size |
2.5 |
124-127mm |
Trim to Size |
3 |
128-131mm |
Trim to Size |
Have a question that's not answered here? Please contact us for more information.
Q How long can the Flip Flop be left on?
A The Flip Flop can be left on for 4-6 weeks.
Q Is the Flip Flop sold in pairs?
A No, the Flip Flop is sold individually.
Q Do I need a length measurement?
A No, to adjust the length, the Flip Flop may need to be trimmed down. You can use hoof nippers, a rasp, or a table saw.
Q Is the sizing the same as the Glove and Glue on?
A Yes. The width measurements will be the same, and the length can be trimmed to fit.
Q Can the Flip Flop be heat fitted?
A Yes, the Flip Flop can be heat fitted the same way the Glue-On or Glove is heat fitted.
Q Can pour in packing be used with the Flip Flop?
A Yes, pour in packings can be used with the Flip Flop. We recommend Vettec Equipak Soft, Glue-U Shufill Silicone or dental impression material.
Q Which adhesive can be used when applying the Flip Flop?
A We recommend using Vettec Adhere. EasyShoe Bond Fast Set and Slow Set may also be used.
Q Is the Flip Flop compatible with the Therapy Click System?
A Yes, the Flip Flop is compatible with the Therapy Click System.
Q Can the hoof prep be done with the hoof on the ground?
A Yes, since the Flip Flop’s only gluing surface is on the dorsal vertical wall the horse can be standing flat if needed to keep a horse comfortable.
Q Why is the junction at cuff and the base so thick?
A Since the back portion of the base has so much movement this thicker area insures the base will not separate from the cuff. Do not modify this with a hoof buffer or rasp. This could cause the Flip Flop to fail.
Q Is the Flip Flop a shoe or a boot?
A Both. It has the benefits of a boot but can be left on the same duration as a shoe.
Q What is the difference between EasyShoes and the Flip Flop?
A The Flip Flop is much easier to apply than the EasyShoes, also the Flip Flop is compatible with the Therapy Click System where the EasyShoes are not.
Q Do I have to worry about rocks or small debris getting lodged between the base of the Flip Flop and the hoof?
A No, during testing there were no complications with anything getting lodged. We recommend checking after each ride. Adding a pour in pad will insure nothing can become lodged in the front portion of the Flip Flop. The flexibility in the rear part of the Flip Flop prevents anything from getting stuck in the back half of the foot.
Q Can the Flip Flop be reset?
A No, we do not recommend resetting the Flip Flop.
Q How do I remove the Flip Flop?
A To remove the Flip Flop you will need to pull the base away from the hoof then cut the junction of the cuff and base, removing the entire base off of the cuff. Then, use pull offs to carefully remove the cuff from the hoof wall.